Kitchen Fit

This kitchen was in need of updating so the client chose every part of the kitchen ready to be fitted. I did this project in stages, working from left to right and began by removing the old worktops and units. I assembled the new base units and had to make adjustments to fit around existing pipe work. I could then cut and fit the worktops. I cut holes in the worktop for the hob and sink then plumbed in the new sink. I put up the wall units and added the cladding, cornices and pelmets while waiting for an electrician to wire in the oven and hob. Next up was fitting the door handles to the door and drawer fronts and starting work on the trim. I fitted upstands around the perimeter of the worktop and plinths underneath the base units. The last thing to do was to seal the entire kitchen with clear silicone.